Product range Safety Edges
Mayser Safety Edges are sensors which make pinching and shearing edges safe from the danger of pinching. Depending on the switching principle, they are offered as a normally closed contact or a break contact.
Safety Edges and Miniature Safety Edges are used for Drag Detection and Obstacle Detection in passenger cars, on bus and train doors, in the machine-building sector or on doors, gates and windows in building technology.
If the Safety Edge meets with an obstacle, the automatic movement is stopped immediately. For example, if a hand gets caught in a closing door.
Whatever you want to protect or safeguard with our Anti Pinch Sensor: we offer you the right technology and the right rubber profile.
Mayser Safety Edges comply with the requirements of the EN1760-2 and EN13849 standards. Depending on the requirements, we produce Safety Edges with various bend radii, angled geometries and active ends. Our comprehensive range also includes higher protection classes (IP 67) or Safety Edges for use in potentially explosive atmospheres (ATEX).
Using our DIY Safety Edge kits you can produce Safety Edges yourself, quickly and cost-effectively.
Mayser Miniature Safety Edges
Mayser Miniature Safety Edges are especially developed for short overtravel distances and minimal installation heights. They are used as Anti Pinch Sensors in passenger cars, buses and trains, in mechanical engineering and in the medical, furniture and building sectors.
Mayser normally closed Safety Edges SL/NC
Mayser normally closed Safety Edges are used as Anti Pinch Sensors and transmit signals straight to the control system of machines, plant and equipment, stages or gates - no special control unit is required.
Mayser normally open Safety Edges SL/NO
Mayser normally open Safety Edges are used as Anti Pinch Sensors. They are available in a wide range of profile geometries and make pinching and shearing edges of machines, systems, stages and gates safe - reliably.
Mayser DIY Safety Elements
For professional production of your Safety Elements, we have three quick and uncomplicated methods: moulding technology, DIY using spring contacts or a DIY system for our Miniature Safety Edges.